Laboratory Water – Grade 3 (BS EN ISO 3696:1995)
- Product Information
- Product Video
- B2B Note
- More Options
- Questions & Answers
What is Grade 3 Laboratory Water?
Grade 3 Laboratory Water is a quality type of water that meets government specifications that are laid out by British or International standards. This water is intended for laboratory use only. Grade 3 water is produced either by a single distillation, reverse osmosis or through deionisation.
According to guidelines, Grade 3 water should contain no more than the following maximum contaminant levels:
Resistivity at 25 oC [MΩ·cm]
Conductivity at 25 oC [μS·cm−1]
pH at 25oC
Total Organic Carbon/p.p.b.(μg/l)
What is Grade 3 Lab Water Used For?
Grade 3 Laboratory Water is used for the preparation of reagents and solutions. It is intended for use in analytical work.
ReAgent sells Grade 3 Laboratory Water in containers of 25 Litres up to 25,000 Litre tankers. Contact ReAgent Chemicals if smaller or larger quantities are needed.
|2.987||1||2.799||pH @ 25°C||5||7||0||5.0 - 7.5||20/02/2018||Darren||10/01/2012||0||19/02/2018|
|2.990||4||2.799||Residue on Evaporation||0||2||0||<2||ppm||20/02/2018||Steve Toye||14/07/2015||0||19/02/2018|
The following files are available to download:
|Product ID||Product||post_status||Bulk||Download SDS File|
Please note: we only deliver to registered UK businesses at non-residential addresses with a minimum order value of £100 before VAT
We only supply to mainland UK, contact us on 0800 990 3258 for rates to Ireland.
Please notify us if you have specific delivery requirements such as restricted access, requirement for a tail-lift delivery vehicle or pallet truck. Failure to notify us of a special delivery instructions can incur additional charges from our carriers.
Questions and answers of the customers
There are no questions yet, be the first to ask something for this product.