- Product Information
- B2B Note
- More Options
- Questions & Answers
Looking for Sodium Chloride?
- We supply sodium chloride in 500g, 1 kg and 25 Kg containers, with discounts available for bulk orders
- This product is sold a minimum 99.5% purity and impurities levels not exceeding levels indicated in our Sales Product Specification, available to download from our website
- We also offer 1% w/v and 0.1M sodium chloride solutions
How is sodium chloride manufactured?
This chemical can be simply extracted from natural salt deposits, by drilling wells into halite veins followed by injections of water to dissolve the salt. This solution is left long enough to become saturated with sodium chloride. This untreated brine solution is then pumped out of the well, and transported to a salt refinery for processing.
Commercial salt can also be produced via natural evaporation of seawater in large diked ponds known as condensers. The ponds are organised in such a way that water can slowly flow from one to the next, leaving behind a thick salt layer. After evaporation, the salt is transferred to a wash plant, where it’s processed and cleaned to remove impurities. This process of separating salt crystals is known as fractional crystallization.
Do we really need sodium chloride in our diet?
This chemical is needed in our diet to provide electrolyte supplementation. Both sodium and chloride are one of the major cations and anions in bodily fluids, respectively. They are both essential to control water distribution and electrolyte balance, and they’re also involved in regulating the acid-base balance in the body.
The primary route of excretion is urine, but it may also occur in sweat, especially after exercise. To minimise these losses, both the kidneys and the intestines are very efficient at re-absorbing sodium and chloride. Equally, although some sodium chloride is lost in sweat, this solution represents only a diluted version of body fluids. This means sweating represents a bigger loss of water than electrolytes, unless it’s prolonged and heavy sweating.
Over 30 years’ experience
ReAgent has been an established chemical manufacturer for over 30 years and during that period we’ve built an enviable reputation for high quality products and excellent customer service. We offer a wide range of products, from petrochemicals to pharmaceuticals, as well as speciality test kits and buffer solutions, to name a few. Simply contact us for further information or free technical advice.
|741||2||1.544||Assay (After Drying)||99||100||0||99.0-100.5||%||24/04/2018||Darren Wilson||21/04/2016||0||23/04/2018|
|742||3||1.544||Maximum Limits of Impurities||0||0||0||24/04/2018||Barbara||01/07/2004||0||23/04/2018|
|749||9||1.544||Magnesium and alkaline earth metals (as Ca)||0||100||0||<100||ppm||24/04/2018||Graham||12/04/2016||0||23/04/2018|
The following files are available to download:
|Product ID||Product||post_status||Bulk||Download SDS File|
Please note: we only deliver to registered UK businesses at non-residential addresses with a minimum order value of £100 before VAT
We only supply to mainland UK, contact us on 0800 990 3258 for rates to Ireland.
Please notify us if you have specific delivery requirements such as restricted access, requirement for a tail-lift delivery vehicle or pallet truck. Failure to notify us of a special delivery instructions can incur additional charges from our carriers.
Questions and answers of the customers
There are no questions yet, be the first to ask something for this product.