Conductivity Standard 500 µS
- More Information
- B2B Note
- More Options
- Questions & Answers
Need to buy conductivity standards 500 microsiemens from ReAgent?
- We supply conductivity standards 500 microsiemens in 500 ml containers, with discounts available for bulk order
- MSDS also available to download from our website
- We also supply Conductivity Standard 20 µS, Conductivity Standard 25 µS, Conductivity Standard 84 µS, Conductivity Standard 100 µS, Conductivity Standard 650 µS, Conductivity Standard 1000 µS, Conductivity Standard 1200 µS, Conductivity Standard 1413 µS and Conductivity Standard 10000 µS
- Also, all our products come with further options, such as personalised labelling and custom packaging
How to measure conductivity?
Conductivity is measured with an electrical conductivity meter, commonly known as an EC meter. This device was designed to measure the electrical conductivity in a solution, such as, for example, to produce deionised water or in hydroponics to monitor the amount of nutrients and impurities in water.
The most common equipment used in the lab relies on four platinum electrodes and a potentiometric method. To measure conductivity, an alternating current is passed through the outer pair of electrodes and the potential between the inner pair of electrodes reflects the solution’s conductivity. In theory, conductivity can be calculated by measuring the distance between the two pairs of electrodes, but to obtain more accurate results, usually the process is repeated with calibrating solutions and using electrodes of well-known conductivity.
In an industrial setting, conductivity probes typically use an inductive method, involving two inductively-coupled coils. One of the coils is supplied with a known voltage to produce a magnetic field, while the other coil works as a transformer. Then the solution to be tested is forced through a channel in the sensor to form a turn in the secondary winding of the transformed. In this case, the induced current is the measurement of conductivity. This is the preferred method in large-scale applications because the solution never reaches the electrical parts of the sensor and therefore, it’s easier to maintain.
All our products come with 100% quality guarantee and are usually shipped within 24 hours after purchase. If you’re a regular customer, you may wish to open an account with us to make your orders go faster and smoother. If you wish to do so, please contact us and a member of our sales team will be glad to help you. If you need further information or free technical advice about all our products, a member of our customer service team is always available to assist you.
The following files are available to download:
|Product ID||Product||post_status||Bulk||Download SDS File|
Please note: we only deliver to registered UK businesses at non-residential addresses with a minimum order value of £100 before VAT
We only supply to mainland UK, contact us on 0800 990 3258 for rates to Ireland.
Please notify us if you have specific delivery requirements such as restricted access, requirement for a tail-lift delivery vehicle or pallet truck. Failure to notify us of a special delivery instructions can incur additional charges from our carriers.
Questions and answers of the customers
There are no questions yet, be the first to ask something for this product.