Conductivity Standard 1200 µS
- Product Information
- B2B Note
- More Options
- Questions & Answers
Looking for conductivity standards 1200 microsiemens?
- We supply conductivity standards 1200 microsiemens in 500 ml containers, with discounts available for bulk orders over 4 items
- We also supply Conductivity Standard 20 µS, Conductivity Standard 25 µS, Conductivity Standard 84 µS, Conductivity Standard 100 µS, Conductivity Standard 500 µS, Conductivity Standard 650 µS, Conductivity Standard 1000 µS, Conductivity Standard 1413 µS and Conductivity Standard 10000 µS
- In addition, all our products come with 100% quality guarantee and are usually shipped within 24 hours
- Contact us for further information
Units of measurement
Electrical conductivity is defined as the ability of a solution to conduct electrical current. The reciprocal value is often described as electrical resist ivory and is measured in ohms. In practical terms, conductivity reflects the concentration of dissolved solids which are ionised in a solution like water (or any other polar solution).
The unit of measurement for conductivity is the Siemens per centimetre or S/cm. The final value depends on the conductivity of each solution, varying from microSiemens to milliSiemens, for example. Typically, the most common unit used is the microSiemens, which represents the one millionth part of a Siemens per centimetre, which is applied to solutions with extremely low conductivity values. In more concentrated solutions, it may be better to use milliSiemens/cm (mS/cm), which is a thousandth of a Siemens (10-3 S/cm). In this case, 1000 µS/cm is equal to 1 mS/cm. To simplify results, conductivity can be expressed simply as micro or milliSiemens. This is technically incorrect, but it’s commonly used in the understanding that the complete unit is implied.
There are other units that can be used, including total dissolved solids (TDS), which is commonly used in the water industry to indicate hardness of water. While in some cases this may not entirely correlate with conductivity as it indicates all solids present in solution, it works for the water industry, as solids are predominantly present in ionic form, which influences conductivity.
We’ve been established in the market for over 30 years and during that period we’ve built an enviable reputation for high quality products and excellent customer service. If you need help, a member of staff will be glad to help before, during and after your order. All our products also come with multiple options, such as customised labelling and bespoke blending. Contact us for further information.
The following files are available to download:
|Product ID||Product||post_status||Bulk||Download SDS File|
Please note: we only deliver to registered UK businesses at non-residential addresses with a minimum order value of £100 before VAT
We only supply to mainland UK, contact us on 0800 990 3258 for rates to Ireland.
Please notify us if you have specific delivery requirements such as restricted access, requirement for a tail-lift delivery vehicle or pallet truck. Failure to notify us of a special delivery instructions can incur additional charges from our carriers.
Questions and answers of the customers
There are no questions yet, be the first to ask something for this product.