Conductivity Standard 1413 µS

Conductivity Standard 1413 µS

£32.95

£32.95

From: £32.95

SKU: N/A
Clear
Select Quantity:
Select Quantity:

Looking for further options on this product?

  • Custom packaging
  • Personalised labelling
  • Specific pack sizes
  • Bespoke blending
  • Bulk quantities
  • Different grades available

Call 0800 990 3258 for details or Contact Us

  • Product Information
  • Specification
  • Hazard Information
  • Precautionary
  • Shipping Statements
  • MSDS

Description

Need conductivity standards 1413 microSiemens?

  • We supply conductivity standards 1413 microsiemens in 500 ml containers, with discounts available for bulk orders over 4 items
  • We also supply Conductivity Standard 20 µS, Conductivity Standard 25 µS, Conductivity Standard 84 µS, Conductivity Standard 100 µS, Conductivity Standard 500 µS, Conductivity Standard 650 µS, Conductivity Standard 1000 µS, Conductivity Standard 1200 µS and Conductivity Standard 10000 µS
  • In addition, all our products come with further options, such as specific pack sizes and personalised labelling

 

Resistivity versus Conductivity There are some situations where, instead of expressing results as conductivity, it may be easier to express as resistivity. One example is ultra pure water, where conductivity values can be extremely low, and it is better to use whole numbers (from resistivity) as opposed to fractions (if expressed as microSiemens). These two units are exactly the inverse of each other: the reciprocal of 0.10 µS/cm [or 1/(0.10 x 10-6 S/cm)] is 10 x 106 ohms-cm (10 MΩ-cm). This means both measurements can be used interchangeably and represent exactly the same result.

Why is it important to measure at a specific temperature?

Temperature plays a vital role when assessing samples for conductivity. As such, measurements are usually conducted at 25 degree Celsius, which is a typical reference temperature. If measurements are done in a different temperature, it may affect results, as ionic activity increases with increasing temperature.

 

To avoid these errors, it is possible to correct values obtained with different temperatures by using a correction coefficient, expressed as a percentage per degree Celsius. If needed, this correction coefficient factor can be determined by measuring a sample at the reference temperature and again at a higher temperature. From these results, it’s possible to calculate the correction value.

 

100% quality guarantee

All our products come with 100% quality guarantee and are usually shipped within 24 hours after purchase. If you need help, contact us and a member of our customer service team will be glad to assist you before, during and after your purchase. We also offer free technical advice about all our products.

Specification

BulkCodePictogrampictogramimageidActive

signalresult

MSDS Files

The following files are available to download:

Product IDProductpost_statusBulkDownload SDS File

Please note: we only deliver to registered UK businesses at non-residential addresses with a minimum order value of £100 before VAT

We only supply to mainland UK, contact us on 0800 990 3258 for rates to Ireland.

Please notify us if you have specific delivery requirements such as restricted access, requirement for a tail-lift delivery vehicle or pallet truck. Failure to notify us of a special delivery instructions can incur additional charges from our carriers.

0800 990 3258